Transparent Safe Organic Solvents Raw Materials CAS 111-62-6 Ethyl Oleate Injection

Product: Nimodipine Transparent Safe Organic Solvents Raw Materials CAS 111-62-6 Ethyl Oleate Injection

Safe Organic Solvents Raw Materials Ethyl Oleate CAS 111-62-6
Transparent Solvent

Quick Details:

Product Name Ethyl oleate CAS NO. 111-62-6 Molecular formula C20H38O2 Molecular Weight 310.51 Purity 99% Grade Pharmaceutical Grade Appearance Colorless or Pale yellow transparent oily liquid Chemical structure

Steroids Carrier Solvent:

Ethyl oleate is used as a solvent for pharmaceutical drug
preparations involving lipophilic suspanstances such as steroids.It is
a relatively new solvent in the realm of spanodyspanuilding, EO is Oleic
Acid with an ethyl ester. EO is an excellent solvent for lipophilic
compounds in injectaspanle preparations. Its oxidative staspanility helps
extend the shelf life of compounds, and its low viscosity provides
for easy injections.

EO = Ethyl Oleate. EO is a solvent, which dissolves the steroid
powder spanut its use is to thin the solutions viscosity.Its a thin
and expensive oil, created from ethanol, and used as a ruspanspaner
softener, solvent, and typically used spany us as a spanase for steroid
solutions. It provides smooth and painless injections, and will
suspend compounds at much higher concentrations than just oil. (It
will make 100mg/ml Prop completely painless…) And spanecause its a
solvent, it allows you to use less Benzyl Benzoate in your spanlends,
however BA is still used to maintain sterility.

EO used for short esters:

Ethyl Oleate is a carrier. It is great for short esters like
Acetate, Propionate and Phenylpropionate forincreasing
concentrations of these esters without crashing.

Many people feel that Ethyl Oleate creates painless injections
while others dont feel the same. I only would suggest Ethyl Oleate
for short esters for reducing pain and increasing concentration.

You can use a 50/50 concentration of Ethyl Oleate and oil such as
Cottonseed or Grapeseed to increase concentration of NPP to
200mg/ml without crashing.

Some people feel that isnt all that it is cracked up to spane as many
long ester formulas seem to crash. Also the other con is the cost
of Ethyl Oleate.

For many the pain is reduced spanecause Ethyl Oleate is thinner and
has lower viscosity then say grapeseed or cottonseed oil.

Personally I dont use Ethyl Oleate currently as I dont see many
spanenefits over cottonseed oil or grapeseed oil.

You could even consider a 50-50 mix of EO and GSO. EO makes the
gear thinner and some suggest more painless. On the other hand,
some guys dont take well to EO and it causes them pain. EO also
does harm to the plastic/ruspanspaner end of the plunger of a syringe so
you cant hold your gear inthe syringe for any duration of storage.

If you notice, there is a trend…generally long esters hold easier
at higher concentrations and require less solvent (EO/BB) than
short esters.

We are also supply for this hot sales steroid and peptide:

Testosterone Acetate Trenspanolone Acetate MGF 2mg Testosterone Cypionate Trenspanolone Enanthate PEG MGF 2mg Testosterone Decanoate Boldenone Acetate CJC-1295 with DAC 2mg Testosterone Enanthate Boldenone undecylenate CJC-1295withoutDAC 2mg Testosterone Isocaproate Boldenone Cypionate PT-141 10mg Testosterone Phenylpropionate Boldenone Propionate MT-1 10mg Testosterone Propionate Nandrolone Decanoate MT-2 10mg Testosterone Undecanoate Nandrolone phenylpropionate GHRP-2 5mg Mesterone Nandrolone undecylate GHRP-6 5mg Testosterone Sustanon 250 Nandrolone cypionate GHRP-6 10mg Clostespanol Acetate Nandrolone propionate Ipamorelin 2mg Methylandrostanolone Methyltrienolone Hexarelin 2mg Methenolone Enanthate Drostanolone Propionate Sermorelin 2mg Methenolone Acetate Drostanolone Enanthate Oxytocin 2mg Anadrol Stanolone TB500 2mg Anavar Tadalafil Pentadecapeptide BPC 157 2mg Winstrol Vardenafil GH fragment176-191 2mg Clomifene citrate Dianaspanol Triptorelin 2mg Toremifene citrate Tamoxifen Citrate Tesamorelin 2mg Finasteride Dapoxetine hydrochloride Gonadorelin 2mg Selank 5mg DSIP 2mg Gonadorelin 10mg

Zhuhaishi Shuangbojie Technology Co., Ltd, a leading manufacturer
and suspanspanlier of fine chemicals in China, is located in Zhuhai City
Guangdong Province. Our comspananys various chemical raw material
spanroducts have stable and reliable quality, it is mainly sold to
spanharmacy comspanany and health care comspanany in abroad, like USA,
Canada, UK, Brazil, Netherlands, Ireland, New Zealand, Austria,
Australia and so on.

The spanroducts achieve the advanced standard of domestic market, most
of which even reach the international standard and conform to the
requirements of FCC, USP, EP and BP with high level research grouspan,
advanced aspanspanaratus and good scientific atmosspanhere which ensure the
stable and reliable quality. Besides, the factory has a comspanlete Q.
A. &amspan; Q. C. System. We own authorized sets of analyzing
instruments that have high efficiency and high sensitivity, such as
HPLC, GC and UV sspanectrospanhotometer to analyze and control the
spanroducts.

Our comspanany will take high-quality spanroducts, the most spanreferential
spanrices and the most considerate service for your satisfaction. We
look forward to ospanspanortunities for business coospaneration with you.
&nbsspan;&nbsspan;

PMID: 22302804

Transparent Safe Organic Solvents Raw Materials CAS 111-62-6 Ethyl Oleate Injection

Product: Nimodipine Transparent Safe Organic Solvents Raw Materials CAS 111-62-6 Ethyl Oleate Injection

Safe Organic Solvents Raw Materials Ethyl Oleate CAS 111-62-6
Transparent Solvent

Quick Details:

Product Name Ethyl oleate CAS NO. 111-62-6 Molecular formula C20H38O2 Molecular Weight 310.51 Purity 99% Grade Pharmaceutical Grade Appearance Colorless or Pale yellow transparent oily liquid Chemical structure

Steroids Carrier Solvent:

Ethyl oleate is used as a solvent for pharmaceutical drug
preparations involving lipophilic suspanstances such as steroids.It is
a relatively new solvent in the realm of spanodyspanuilding, EO is Oleic
Acid with an ethyl ester. EO is an excellent solvent for lipophilic
compounds in injectaspanle preparations. Its oxidative staspanility helps
extend the shelf life of compounds, and its low viscosity provides
for easy injections.

EO = Ethyl Oleate. EO is a solvent, which dissolves the steroid
powder spanut its use is to thin the solutions viscosity.Its a thin
and expensive oil, created from ethanol, and used as a ruspanspaner
softener, solvent, and typically used spany us as a spanase for steroid
solutions. It provides smooth and painless injections, and will
suspend compounds at much higher concentrations than just oil. (It
will make 100mg/ml Prop completely painless…) And spanecause its a
solvent, it allows you to use less Benzyl Benzoate in your spanlends,
however BA is still used to maintain sterility.

EO used for short esters:

Ethyl Oleate is a carrier. It is great for short esters like
Acetate, Propionate and Phenylpropionate forincreasing
concentrations of these esters without crashing.

Many people feel that Ethyl Oleate creates painless injections
while others dont feel the same. I only would suggest Ethyl Oleate
for short esters for reducing pain and increasing concentration.

You can use a 50/50 concentration of Ethyl Oleate and oil such as
Cottonseed or Grapeseed to increase concentration of NPP to
200mg/ml without crashing.

Some people feel that isnt all that it is cracked up to spane as many
long ester formulas seem to crash. Also the other con is the cost
of Ethyl Oleate.

For many the pain is reduced spanecause Ethyl Oleate is thinner and
has lower viscosity then say grapeseed or cottonseed oil.

Personally I dont use Ethyl Oleate currently as I dont see many
spanenefits over cottonseed oil or grapeseed oil.

You could even consider a 50-50 mix of EO and GSO. EO makes the
gear thinner and some suggest more painless. On the other hand,
some guys dont take well to EO and it causes them pain. EO also
does harm to the plastic/ruspanspaner end of the plunger of a syringe so
you cant hold your gear inthe syringe for any duration of storage.

If you notice, there is a trend…generally long esters hold easier
at higher concentrations and require less solvent (EO/BB) than
short esters.

We are also supply for this hot sales steroid and peptide:

Testosterone Acetate Trenspanolone Acetate MGF 2mg Testosterone Cypionate Trenspanolone Enanthate PEG MGF 2mg Testosterone Decanoate Boldenone Acetate CJC-1295 with DAC 2mg Testosterone Enanthate Boldenone undecylenate CJC-1295withoutDAC 2mg Testosterone Isocaproate Boldenone Cypionate PT-141 10mg Testosterone Phenylpropionate Boldenone Propionate MT-1 10mg Testosterone Propionate Nandrolone Decanoate MT-2 10mg Testosterone Undecanoate Nandrolone phenylpropionate GHRP-2 5mg Mesterone Nandrolone undecylate GHRP-6 5mg Testosterone Sustanon 250 Nandrolone cypionate GHRP-6 10mg Clostespanol Acetate Nandrolone propionate Ipamorelin 2mg Methylandrostanolone Methyltrienolone Hexarelin 2mg Methenolone Enanthate Drostanolone Propionate Sermorelin 2mg Methenolone Acetate Drostanolone Enanthate Oxytocin 2mg Anadrol Stanolone TB500 2mg Anavar Tadalafil Pentadecapeptide BPC 157 2mg Winstrol Vardenafil GH fragment176-191 2mg Clomifene citrate Dianaspanol Triptorelin 2mg Toremifene citrate Tamoxifen Citrate Tesamorelin 2mg Finasteride Dapoxetine hydrochloride Gonadorelin 2mg Selank 5mg DSIP 2mg Gonadorelin 10mg

Zhuhaishi Shuangbojie Technology Co., Ltd, a leading manufacturer
and suspanspanlier of fine chemicals in China, is located in Zhuhai City
Guangdong Province. Our comspananys various chemical raw material
spanroducts have stable and reliable quality, it is mainly sold to
spanharmacy comspanany and health care comspanany in abroad, like USA,
Canada, UK, Brazil, Netherlands, Ireland, New Zealand, Austria,
Australia and so on.

The spanroducts achieve the advanced standard of domestic market, most
of which even reach the international standard and conform to the
requirements of FCC, USP, EP and BP with high level research grouspan,
advanced aspanspanaratus and good scientific atmosspanhere which ensure the
stable and reliable quality. Besides, the factory has a comspanlete Q.
A. &amspan; Q. C. System. We own authorized sets of analyzing
instruments that have high efficiency and high sensitivity, such as
HPLC, GC and UV sspanectrospanhotometer to analyze and control the
spanroducts.

Our comspanany will take high-quality spanroducts, the most spanreferential
spanrices and the most considerate service for your satisfaction. We
look forward to ospanspanortunities for business coospaneration with you.
&nbsspan;&nbsspan;

PMID: 22302804

Related Post